Frc labview 2013 update how to#
Frc labview 2013 update driver#
Frc labview 2013 update manual#
Frc labview 2013 update full#
Frc labview 2013 update software#

Frc labview 2013 update manual#

Safety: Please go over the safety guidelines in section 4.2 of the FRC Manual and the FRC Safety Manual with your teams before attending the quick build sessions.

Frc labview 2013 update driver#

Those non-rookie teams will need to pull the items not included in their KOP from their previous robots and kits and are required to bring your driver station. вЂ“ old 27pin cable (cRIO to Digital Side Car Cable)Дue to limited time we CANNOT wait while a team tracks down a part so it is critical that the kits are pre-sorted. вЂ“ Driver Station (Netbook, joysticks (2x)) with 2013 image, LabVIEW, and all Updates (LabVIEW, Utilities and Driver Station) installed! Vetran teams also need to bring the following items: Pretty much everything else in the KOP needs to be brought with you, and sent to the Control System Room. Everything in the Andymark Drive Base Kit, along with the 2.5вЂі CIM Motors (part number 217-2000 or RM25R-45F-1004) from the Black Tote need to go in the Mechanical Team Kit. If you have Word 2010 you can download this file and sort it any way you wish.

Frc labview 2013 update how to#

HERE is the list of how to sort the KOP as a PDF file.

Frc labview 2013 update full#

The full KOP should be pre-sorted into kits for the Mechanical and Control System. Kit of Parts (KOP): Each team is required to bring all the parts included in the ROOKIE TEAM KIT. вЂ“ Joystick(s) that will be used by the team

Frc labview 2013 update software#

вЂ“ Laptop computer loaded with LabVIEW and Driver Station Software (would be better if you have one PER programmer) вЂ“ Cordless drill small drill be set up to 3/8вЂќ вЂ“ Wire crimpers вЂ“ a good set with handles at least 7вЂќ long вЂ“ Safety Glasses and Gloves for every student вЂ“ 9/16вЂќ socket (2) (deep well are a plus) вЂ“ Cordless drill w/ 3/16вЂќ allen wrench bit is a plus вЂ“ 3/16вЂќ allen wrenches (2), preferably a T-handle, screwdriver type, or loop/wire handle for fast turning The following is the MINIMUM tools required:

Tools: Each team is required to bring their own tools to the quick build session. Please decide who will be doing what BEFORE coming to the Quick Build. The Programming Team will participate in a LabVIEW seminar with Ryan Sparks from National Instruments. The Control Team will be doing the electrical wiring, вЂњradioвЂќ, cRIO configuration and driver station configuration. The Build Team will be responsible for building the robot frame and drive train (gear boxes and wheels). Teams will be broken up into Build, Control and Programming Teams. Please RSVP via Email to by indicating your Team number, Team Name, School, Contact Person (Teacher) and Number attending event (please be accurate, since food will be ordered based on numbers).Release forms for all participants (under 18 years of age will need parent signature).Gloves for those building the robot frame.Safety glasses for all participants in the building of transmission, robot frame and electronics control board.Non-Rookie Teams will have the parts from last yearвЂ™s robot not included in their Kit of Parts with them as well (mostly control system components).Every team is REQUIRED to have netbook and/or laptop computer (with 2013 image (Netbook only, Win XP or 7 for laptops), LabVIEW and Driver Station installed вЂ“ this will be done for teams if computer, power supply, LabVIEW DVD and image thumbdrive (for 2013 rookies only) are left at UofM at kickoff, otherwise it will be the teamвЂ™s responsibility to perform these tasks.Every team will bring their Kit of Parts with them to the build sessions (pre sorted).Every team should have a running robot base by the conclusion.Every team to have basic code loaded to the control system.

Every team to have an updated driver / programming station.

Every team to complete a basic robot base (frame and drive system).

Those over 18 years old can fill out the form at the event (all other require a parent or guardian signature) These will be turned in when the team registers at the event. Release Forms: Each participant is REQUIRED to turn in a Release Form for the event. The gate will either be open or someone will be there to open it for you. Parking: Teams are asked to park in LOT 45 (Shown above) off of Zach Curlin Street. Special Guest: Ryan Sparks from National Instruments (who will be doing a LabVIEW Seminar for team programmers) Who: Memphis City School Teams and invited guests Location: University of Memphis, Herff College of Engineering, Engineering Technology Building